EOT Crane Full Form (Electric Overhead Travel)

There are various types of overhead cranes, industrial cranes & EOT Crane pdf with many being highly specialised, but the great majority of installations into one of three categories.

1. Top running single girder bridge cranes,
2. Top running double girder bridge cranes and
3. Under-running single girder bridge cranes. Electric Overhead Traveling

What are the different types of cranes?

EOT Cranes

EOT Crane stands for Electric Overhead travelling cranes. This is the most commonly preferred EOT crane that is usually used in load lifting and shifting. They have the parallel runways and the gap is spanned by a travelling bridge. The hoist is mounted on this bridge. These cranes can be operated electrically.

Single girder cranes

The crane consists of a single bridge girder supported on two end trucks. It has a trolley hoist mechanism that runs on the bottom flange of the bridge girder.

Single Girder Cranes are the ones that are used in work units where heavy materials required either shifting or lifting. These cranes are solely used for maintenance and manufacturing purpose. The primary purpose of these cranes is to move heavy materials quickly and conveniently. These cranes offer high durability and can perform very well.

Double Girder Cranes

These are the cranes that have a capacity of 2 to 50 MT. Double Girder cranes can be used all heavy lifting purposes. The hook of these cranes can be lifted up to greater heights when compared to the single girder cranes. These cranes can be used in both interiors and exteriors. This is one of the added advantages of this type of cranes.

Jib Cranes

The Jib Cranes are a budget-friendly option and they will serve you in various ways. These robust cranes are capable of lifting heavy weights with ease. They have a broader reach and can cater to different kind of requirements.

Girder Bridge Cranes

The crane consists of two bridge girders supported on two end trucks. The trolley runs on rails on the top of the bridge girders.

Hot Crane

The hot cranes are ideally designed to use in factories where lifting and shifting of heavy material are carried on. They are not used in construction sites. These cranes are used to handle metal manufacturing process. From refining to dispatching the metal, these hot cranes takes care of the entire work.

Gantry Cranes

The Gantry cranes have a flexible and dynamic design with staunch moving ability. They can be used to carry heavy weighted goods from one place to another with the utmost convenience.

These cranes are essentially the same as the regular overhead cranes except that the bridge for carrying the trolley or trolleys is rigidly supported on two or more legs running on fixed rails or another runway. These “legs” eliminate the supporting runway and column system and connect to end trucks which run on a rail either embedded in or laid on top of, the floor.

Monorail

For some applications such as production assembly line or service line, only a trolley hoist is required. The hoisting mechanism is similar to a single girder crane with a difference that the crane doesn’t have a movable bridge and the hoisting trolley runs on a fixed girder. Monorail beams are usually I-beams (tapered beam flanges).

What is the meaning of EOT Crane?

The Electric Overhead Travelling cranes are the most frequently used cranes in the construction places and in industries. These cranes are operated with the help of electricity and one can operate it either by control room attached to the crane or by a pendant. These cranes have the capacity to lift both heavy and lightweight goods.

Single Girder EOT Cranes Means

The single girder EOT cranes are lighter when compared to the double girder ones and they have only one main bridge. They are mostly used for short period work and they help in lifting light duty loads to be precise one can lift 1 to 20 ton of load with the help of single girder EOT cranes. They are manufactured in both top running and under running models.

Double Girder EOT Cranes Means

Double Girder EOT cranes are used to lift heavy weights. They are a cost-effective option when compared with single girder cranes and are capable of lifting heavier weights. They are compatible with wide pans. They have two main bridges and this makes it robust as well as sturdy in nature.

How does EOT crane work?

The EOT crane works by using electricity and it can be operated with the help of either the driver or the pendant (remote control). The crane is capable of lifting up to 500 tonnes with a span of 60 meters. The universal coupling mechanism is incorporated in these cranes to facilitate both installation and adjustment. The mechanism consists of only four active and driven wheels, if the weight that has to be lifted is more, the wheel pressure is reduced. The articulated frame device will distribute among the four wheels so that the weight doesn’t pressurize only a particular wheel.

Which Crane should you choose – Single Girder or Double Girder

A common misconception is that double girder cranes are more durable! Per the industry standards (CMMA/DIN/FEM), both single and double girder cranes are equally rigid, strong and durable. This is because single girder cranes use much stronger girders than double girder cranes. The difference between single and double girder cranes is an effective lifting height. Generally, double girder cranes provide better lifting height. Single girder cranes cost less in many ways, only one cross girder is required, a trolley is simpler, installation is quicker and runway beams cost less due to the lighter crane dead weight. The building costs are also lower.

However, not every crane can be a single girder crane. Generally, if the crane is more than 15 ton or the span is more than 30m, a double girder crane is a better solution. The advantages and limitations of Single / double girder cranes are as follows:

Single Girder Cranes Works

• Single girder bridge cranes generally have a maximum span between 20 and 50 feet with a maximum lift of 15-50 feet.
• They can handle 1-15 tonnes with bridge speeds approaching a maximum of 200 feet per minute (fpm), trolley speeds of approximately 100 fpm, and hoist speeds ranging from 10-60 fpm
• They are candidates for light to moderate service and are cost effective for use as a standby(infrequently used) crane.
• Single girder cranes reduce the total crane cost on crane components, runway structure andbuilding.

Double Girder Cranes Works

• Double girder cranes are faster, with maximum bridge speeds, trolley speeds and hoist speeds approaching 350 fpm, 150 fpm, and 60 fpm, respectively.
• They are useful cranes for a variety of usage levels ranging from infrequent, intermittent use to continuous severe service. They can lift up to 100 tons.
• These can be utilized at any capacity where extremely high hook lift is required because the hook can be pulled up between the girders.
• They are also highly suitable where the crane needs to be fitted with walkways, crane lights, cabs, magnet cable reels or other special equipment.

EOT CRANE CONFIGURATION

1. Under Running (U/R)
2. Top Running (T/R)

EOT Crane Working Principle

There are three working movements of EOT Crane- crane hook up and down lifting, trolley lateral movement and crane long travelling longitudinal motion.

The motor exhibits a driving force of the hoisting mechanism. This transmits the power to high-speed shaft end. The ring gear transmits the driving force and then with the help of pulleys and wire ropes the crane hook is driven up and down. Similarly, the half gear coupling, its joint and compensation shaft will help in rotating trolley wheels.

Under running cranes

Under Running or underslung cranes are distinguished by the fact that they are supported from the roof structure and run on the bottom flange of runway girders. Under running, cranes are typically available in standard capacities up to 10 tons (special configurations up to 25 tons and over 90 ft. spans). Underhung cranes offer excellent side approaches, close headroom and can be supported on runways hung from existing building members if adequate.

The Under Running Crane offers the following advantages:

• Very small trolley approach dimensions meaning maximum utilization of the building width and height.
• The possibility of using the existing ceiling girder for securing the crane track.

Following are some limitations to Under Running Cranes

• Hook Height – Due to Location of the runway beams, Hook Height is reduced
• Roof Load – The load being applied to the roof is greater than that of a top running crane

Lower Flange Loading of runway beams require careful sizing otherwise, you can peel the flanges off the beam.

Types of EOT cranes catalog

There are various models of EOT cranes available in the market. If you want to know more about these types of cranes, their specifications and decide which one among them is your right choice, just download the catalog. It has everything you want to know about EOT cranes.

EOT Crane Catalog

Double Girder EOT Crane Catalog

Single Girder EOT Crane Catalog

Jib Crane

HOT Crane

MCPB Crane

Electric Wire Rope Hoists

Choosing the Right EOT Crane for Your Needs

Electric Overhead Traveling (EOT) cranes are a versatile and essential tool for various industrial applications. However, selecting the right EOT crane for your specific needs is crucial for maximizing efficiency and safety. This guide explores key factors to consider when making your choice:

1. Capacity:

• Determine the weight of the heaviest load you’ll be lifting and choose a crane with a capacity exceeding that weight for a safety buffer.
• EOT cranes come in various capacities, from handling light machinery to heavy industrial equipment.

2. Span:

• Measure the distance the crane needs to cover horizontally to ensure it can reach all designated lifting zones within your workspace.
• EOT cranes are available in different spans to accommodate various facility layouts.

3. Lift Height:

• Consider the maximum height you’ll need to lift loads.
• EOT cranes offer varying lift heights depending on the hoist design and runway configuration.

4. Duty Cycle:

• Evaluate how frequently you’ll be using the crane. This will help determine the appropriate duty class (light, medium, or heavy) for your crane.
• Choosing the right duty class ensures the crane can withstand the demands of your operation without premature wear and tear.

5. Single vs. Double Girder:

• Single Girder EOT Cranes: Ideal for lighter loads and offer a more cost-effective solution.
• Double Girder EOT Cranes: Provide superior stability and lifting capacity for heavier loads.

For a more detailed exploration of EOT crane types and specifications, consider downloading a comprehensive EOT Crane PDF guide. By carefully considering these factors and referring to EOT crane resources, you can make an informed decision and select the perfect EOT crane to optimize your lifting operations.

Exploring Specialized EOT Crane Designs

While standard EOT cranes offer great versatility, specific applications may require specialized designs. Here’s a glimpse into some unique EOT crane configurations:

• Top Running vs. Under Running Cranes:
  • Top running cranes operate on elevated tracks, maximizing headroom.
  • Under-running cranes travel beneath the runway, suitable for facilities with limited overhead space.

• Monorail Cranes:
  • These cranes consist of a single beam suspended from a track, offering a space-saving solution for lighter loads.

• Stacker Cranes:
  • Designed for automated storage and retrieval systems, these cranes efficiently move and stack materials in warehouses.

• Jib Cranes:
  • Featuring a horizontal arm that extends from a support column, jib cranes offer lifting capabilities in a localized area.

By exploring these specialized options, you can find an EOT crane that caters to your specific lifting requirements and workspace limitations.

Can an EOT Crane Help Your Business? Explore the Benefits and Applications

EOT cranes offer a multitude of benefits that can significantly enhance your business operations:

• Improved Efficiency: EOT cranes streamline material handling, reduce manual labor, and accelerate production processes.

• Enhanced Safety: These cranes promote safe lifting practices by eliminating the risk of worker injuries associated with manual lifting.

• Increased Productivity: EOT cranes enable faster and more efficient load handling, leading to increased overall productivity.

• Versatility: With various configurations and capacities available, EOT cranes can be adapted to handle a wide range of lifting tasks.

• Cost Savings: EOT cranes can reduce labor costs associated with manual lifting and improve overall operational efficiency.

Applications:

EOT cranes are utilized across a vast array of industries, including:

• Manufacturing
• Warehousing
• Construction
• Automotive
• Power Generation
• Shipping & Marine

If your business involves frequent lifting and material handling, an EOT crane can be a game-changer, contributing to a safer, more efficient, and cost-effective work environment.

The post Types of Electric Overhead Travel Cranes ( EOT Cranes Full Form ) appeared first on HoistsandCrane.

1. Top Running (T/R) – The crane bridge travels on top of rails mounted on a runway beam supported by either the building columns or columns specifically engineered for the crane.
2. Under Running (U/R) – The crane bridge travels on the bottom flange of the runway beam which is usually supported by the roof structure.
3. Single Girder (S/G) – The crane consists of two end trucks, a single bridge girder and the trolley hoist unit. The trolley runs on the bottom flange of the bridge girder.
4. Double Girder (D/G) – The crane consists of two end trucks, two bridge girders and the trolley hoist unit. The trolley runs on rails on top of the bridge girders.

A variation on these types of overhead crane is Gantry Cranes. These cranes are essentially the same as the regular overhead cranes; however, the bridge girder(s) are connected to “legs” on either side of the span. These “legs” eliminate the supporting runway and column system and connect to end trucks which run on a rail either embedded in, or laid on top of, the floor.

For some applications only a Trolley Hoist is required. For instance, in the case of a monorail system a Trolley Hoist unit similar to the one used on single girder cranes is mounted on a beam which might be used to service an assembly line within the client’s facility. Other clients may have an existing single or double girder bridge crane and may just want to replace the hoisting unit. In most of these situations, capacity permitting, we can provide either a Wire Rope or Chain Hoist.

Another solution which may fit your needs is a Jib Crane. A Jib Crane basically consists of a boom which is supported as a cantilever on a column. A Trolley Hoist travels along the boom which can rotate up to 360 Degrees.

The post Types of Overhead Cranes appeared first on HoistsandCrane.